Field Runner
Click to plan a route on a soccer field, set the player's top speed, acceleration and braking, and watch position, velocity and acceleration unfold. Export the run to Excel, or save and share the scenario as JSON.
Click the field to add waypoints. Press Set start point and then click to move where the player begins. Reset puts the player back at the start and clears the recorded data, but keeps the route.
Scenario
| Event | Time (s) | Speed (m/s) |
|---|
How the model works
The player moves in a straight line toward the next waypoint with a trapezoidal speed profile. It speeds up at amax until it reaches vmax, holds that speed, then brakes at abrake. Braking starts at the moment the stopping distance d_stop = v² / (2·a_brake) equals the distance left to go. The simulation updates every 1/60 s using the same finite-difference logic you use in Excel: v_new = v + a·Δt and x_new = x + v·Δt.
- Stop at every waypoint on: the player stops at each cone, like a shuttle run. Off: the player runs through the cones and only stops at the last one. Each sharp change of direction then shows up as a spike in the acceleration-magnitude curve. Velocity is a vector, so changing direction is an acceleration even when speed stays the same.
- The acceleration plot shows two curves. Along-path acceleration (dv/dt of speed) is positive when the player speeds up and negative when it brakes. Magnitude |a| is calculated from the x and y components, so it also includes turning.
- Simplifications: the player is a point mass. Acceleration is constant within each phase, and the player turns instantly. Real sprinters accelerate hardest in the first steps, and their acceleration then falls toward zero (Week 4 pre-lab).
Team activities
Week 1: distance vs. displacement
Load Week 1 Vector Walk – Course 2. Before you press Start, predict the displacement magnitude and direction. Then compare your prediction with the readout. Why is distance traveled larger than displacement?
Week 2: reading the curves
Export the "t, x, y" CSV from the 20 m sprint & stop preset. In Excel, calculate velocity and acceleration with finite differences. Check your numbers against the full CSV. Where are your values different, and why?
Week 4: team model challenge
Load 20 m sprint & stop. Set amax to your team's mean a₁ and abrake to your team's mean |a₂|. Move the stop waypoint to 20 m + your mean stopping distance. Compare the simulated 5–20 m split times with your video splits. See the Week 4 report.
Coaching question
Load Pro-agility (5-10-5). Which improves total time more: raising vmax by 1 m/s or raising abrake by 1 m/s²? Explain why.
Scenario JSON format
Saved scenarios are plain JSON, so instructors can write custom drills and post them in your LMS:
{
"name": "20 m sprint & stop",
"settings": { "v_max": 8.5, "a_max": 3.5, "a_brake": 5.0, "stop_at_each": true },
"start": [20, 34],
"waypoints": [[45, 34]],
"marks": [ { "x": 25, "label": "5 m" }, { "x": 40, "label": "20 m" } ]
}
Units are meters. Field is 105 m × 68 m with (0, 0) at the bottom-left corner. "marks" are vertical split lines at the given x positions.