Week 5 · Glycolytic Metabolism

Blood Lactate: Rest, 800 m and Recovery

Lactate is not a waste product and it does not make you sore. This week you sample it from a fingertip at rest and after a maximal 800 m run, and pool the class's samples to build a recovery curve no single person could produce.

Pre-lab ≈ 45 minIn-lab 75 minNotebook ≈ 60 minTools: lactate analyzer, lancets, 2 treadmills, HR monitors

Overview

Each participant gives two capillary samples: one at rest and one at an assigned time (3, 6, 10 or 15 minutes) after a maximal 800 m treadmill run. Four runners are sampled at each time point, so the class data trace the rise and fall of blood lactate in recovery.

Learning objectives

  1. Perform capillary blood lactate sampling using universal precautions and correct technique.
  2. Describe the change in blood lactate from rest to after maximal exercise and relate it to glycolysis.
  3. Build and interpret a pooled class lactate recovery curve.
  4. Relate individual lactate responses to running speed, %HRmax, RPE and training status.
ComponentWhat you doTime
Pre-lab readingBackground, interactive tool and one research article≈ 25 min
Pre-lab quiz (5 pts)8-question checkpoint (2 pts) and 3 discussion questions (3 pts)≈ 20 min
Lab activityStaggered rotation on two treadmills with one analyzer station75 min
Lab notebook (15 pts)Class calculations, three figures, discussion≈ 60 min

Pre-Lab Reading ≈ 25 min

Every pre-lab has the same three parts: background reading, one article from the research literature, and the pre-lab quiz and discussion questions you submit before lab.

1. Where lactate comes from

Glycolysis breaks glucose into two pyruvate molecules, regenerating ATP quickly. Pyruvate then has two fates. It can enter the mitochondria and be oxidized, or lactate dehydrogenase (LDH) can convert it to lactate, regenerating the NAD⁺ that glycolysis needs to keep running. This happens all the time, even at rest. During hard exercise, glycolysis produces pyruvate faster than the mitochondria can take it in, so lactate production outpaces clearance and blood lactate rises.

At the body's pH, practically all lactic acid is dissociated into lactate and a hydrogen ion, which is why physiologists say "lactate." It is measured in mmol/L; resting values are usually about 0.5–2.0 mmol/L, and values after a maximal effort lasting a couple of minutes are often 8–15 mmol/L or more.

2. Where lactate goes

Lactate is a fuel. Through the lactate shuttle it moves (via monocarboxylate transporters) into the heart, less-active muscle fibres and the liver, where it is oxidized or converted back to glucose (the Cori cycle). Training increases mitochondrial density, capillaries and transporters, so trained people produce less lactate at a given speed and clear it faster.

3. Why blood lactate peaks after you stop

Lactate made in muscle takes time to diffuse into the blood. After a short maximal effort, blood lactate usually keeps rising for a few minutes, peaks around 3–8 minutes, and then falls as clearance catches up. Light activity during recovery speeds clearance, because working muscle oxidizes lactate.

4. Thresholds

In an incremental test (gradually rising speed), blood lactate stays near resting at low intensities and then begins to climb steeply. The intensity at that break point is the lactate threshold (LT); a fixed concentration of 4 mmol/L is often called OBLA (onset of blood lactate accumulation). A maximal bout, such as our 800 m, instead produces a single high value after exercise and tells you about glycolytic capacity rather than threshold.

Interactive: Lactate recovery curve

A teaching model of blood lactate after the 800 m. Compare passive and active recovery and training status, then press "Simulate a class" to see what pooled data from 16 different people look like at our four sample times.

5. From the literature ≈ 15 min

Read this week

Goodwin, M. L., Harris, J. E., Hernández, A., & Gladden, L. B. (2007). Blood lactate measurements and analysis during exercise: A guide for clinicians. Journal of Diabetes Science and Technology, 1(4), 558–569. pmc.ncbi.nlm.nih.gov/articles/PMC2769631/

A practical guide to how lactate is made and removed, what a threshold means, and how to sample and measure it well.

Read for:

  1. How lactate is produced and removed, and why blood lactate is a balance of the two.
  2. What a lactate threshold is and how it is found.
  3. Practical sources of error in sampling and in hand-held analyzers.

Optional plain-language read: Why Does Lactic Acid Build Up in Muscles? And Why Does It Cause Soreness? (Scientific American).

Before you come to lab

  • Wear closed-toe shoes. Runners also need running shoes and clothes.
  • Runners: avoid a large meal in the 2 hours before lab, and warm up as instructed.
  • Tell your instructor privately if you faint at the sight of blood or have a bloodborne condition; you can take a non-sampling role.
  • Review the biosafety rules: gloves, sharps container, and test only your own blood.

Pre-Lab Quiz ≈ 20 min

Two parts, both due before lab (5 pts). Checkpoint (2 pts): eight questions on the background and the article; aim for 7 of 8 before you come to lab. Discussion (3 pts): three short written answers you submit to your course site.

Checkpoint

Which enzyme converts pyruvate to lactate?
LDH converts pyruvate to lactate and regenerates NAD⁺ for glycolysis.
Delayed-onset muscle soreness (DOMS) two days after hard exercise is mainly caused by:
Blood lactate returns to resting within about an hour; soreness peaks 24–72 h later.
Why do we wipe away the first drop of blood?
Contamination from skin or interstitial fluid can bias the reading.
Which recovery would clear lactate fastest after the 800 m?
Active muscle oxidizes lactate, so light activity speeds clearance.
Each runner is sampled at only one recovery time. The main limitation is that:
A between-subjects design adds individual variation to each time point; repeated sampling of the same people would isolate the time effect.
Goodwin et al. (2007) wrote their article mainly to help clinicians:
It is a practical measurement guide, which is why it fits this lab.
Blood lactate concentration at any moment reflects:
Lactate rises in the blood only when it appears faster than the heart, liver and other muscles can take it up.
The lactate threshold is best described as the intensity at which:
Below the threshold, removal keeps pace with production; above it, lactate accumulates.

Discussion questions (submit to your course site)

About 75–150 words each unless stated. Each answer is worth 1 point: correct physiology, specific to this lab, and in your own words. Cite the article (author, year) wherever you use it.

1. Which metabolic pathway produces lactate? What does a blood lactate value tell you about the muscle, and what does it not tell you?

2. Hypotheses: (a) How will blood lactate change from rest to after the 800 m run? (b) At which recovery time (3, 6, 10 or 15 min) do you expect the class mean lactate to be highest, and why?

3. Using Goodwin et al. (2007), describe two sampling or analyzer errors that could make a lactate value falsely high or low, and how your group will prevent them today.

Lab Activity 75 min

Safety and screening
  • Screening: anyone with a cardiovascular, metabolic or bleeding disorder, a current injury, or who is uncomfortable with a finger stick serves as a technician only.
  • Blood: gloves for all handling; each lancet is used once and goes straight into the sharps container; wipes, strips and gauze go in the biohazard bag.
  • Treadmill: safety clip on and a spotter behind the treadmill for every run. Speed never exceeds 12 mph.
  • Stop for chest pain, dizziness, nausea, unusual breathlessness, or if the runner asks.
  • Cool-down: never stop the belt abruptly. Slow to about 3 mph for 30 s before the runner steps off.
📍 Set up for your campusCapillary blood sampling usually requires your institution's approval and bloodborne-pathogen training for whoever handles blood. Confirm sharps and biohazard disposal with your safety office before the term. With one treadmill, run the rotation on one belt over two lab days, or have half the class run a maximal 800 m on a track and walk to the analyzer station.

Organization

Two treadmills and one analyzer, run as a staggered rotation. Treadmill B starts 3 minutes after A so samples arrive at the analyzer at different times. Only the 800 m happens on the treadmill, so each belt turns over about every 6 minutes. Groups of 4 rotate: runner, treadmill operator, spotter / HR and RPE, recovery timekeeper. One trained lactate technician stays at the analyzer.

Materials

  • 2 treadmills with safety clips; Borg RPE scale (6–20) posted
  • Portable lactate analyzer with control solution
  • Strips: 2 per participant + 10% spare + 1 QC (16 people = 36)
  • Single-use lancets, alcohol wipes, gauze, bandages, nitrile gloves
  • Sharps container and biohazard bag
  • HR monitors; 3 stopwatches; chairs beside the analyzer

Rotation schedule

Randomly assign participants to slots. Recovery times are minutes after the runner's 800 m mark; four runners are sampled at each time, and the longest waits finish before the end of lab. With more than 16 participants, split the class across two lab days rather than shortening the run.

SlotTreadmill A runnerA recovery sampleTreadmill B runnerB recovery sample
115 min15 min
215 min15 min
310 min10 min
410 min10 min
56 min6 min
66 min6 min
73 min3 min
83 min3 min

Procedure

  1. Quality control. Before the first runner, the lactate technician runs the analyzer check with control solution (1 strip) and records the strip lot/code.
  2. Pre-exercise. Confirm the screening form. Record age, sex, height, body mass, training status and pre-lab compliance (exercise in the last 24 h, time since last meal, caffeine). Fit the HR monitor and explain the stop criteria.
  3. Resting sample. After at least 5 min seated, record resting HR and take strip 1. Record the clock time.
  4. Warm-up 5 min off the treadmill (brisk walk or easy jog + drills), finishing about 1 min before your slot. Record post-warm-up HR.
  5. 800 m. Treadmill at 1% grade, safety clip on. Straddle the belt while the operator brings it to your chosen starting speed, then step on. Run 800 m (0.50 mi) at maximal effort, signalling for ± 0.5 mph changes. Record the time.
  6. At the 800 m mark the timekeeper starts the recovery stopwatch; the spotter records peak HR and RPE. Slow to 3 mph for 30 s, stop, and step off.
  7. Recovery. Walk slowly until 2 min after the 800 m mark, then sit by the analyzer. Everyone recovers the same way.
  8. Recovery sample (strip 2) at your assigned time. Record the actual stopwatch time and HR at that moment. If two samples are due at once, take one on time and the other within 60 s.
  9. Stay in the recovery area until HR is below 120 bpm and you feel normal.

Sampling technique

  1. Gloves on. Warm cold hands by rubbing or shaking them; good blood flow avoids squeezing.
  2. Clean the side of the fingertip with alcohol and let it dry completely.
  3. Insert the strip into the analyzer before lancing.
  4. Lance the side of the fingertip, wipe away the first drop, and gently form a second drop without "milking."
  5. Touch the strip to the drop until the analyzer confirms. Record the value (mmol/L) and time, apply gauze, and drop the lancet in the sharps container.
  6. Use a spare strip only for an error code, an underfilled strip, or clear contamination. Never repeat a measurement because the number is surprising; note it instead and log every spare strip.

Lab Notebook ≈ 60 min · due at the start of next lab

Step 1 — Calculations ≈ 15 min

  • Δ lactate: =O2-H2 (recovery − resting, mmol/L)
  • 800 m time in seconds from min:s text in J2: =J2*86400 if Excel stored it as a time, or enter seconds directly. Speed: =800/seconds m/s; × 2.237 for mph.
  • %HRmax: =K2/(208-0.7*C2)*100
  • Class summary: =AVERAGEIF(M:M,3,O:O) and =STDEV.S(IF(M2:M17=3,O2:O17)) for each recovery time, plus mean ± SD resting lactate.

Step 2 — Figures ≈ 20 min

  • Figure 1 — Individual response: resting vs recovery lactate for every participant, a line joining each person's two values, class mean ± SD overlaid.
  • Figure 2 — Class recovery curve: mean ± SD recovery lactate (mmol/L) vs time after the 800 m (min), with class mean resting lactate as a dashed horizontal line.
  • Figure 3 — Lactate vs intensity: Δ lactate vs average speed or %HRmax, linear trendline and r. Mark points by training status if group sizes allow.

Step 3 — Discussion ≈ 25 min

  1. What is the difference between lactate and lactic acid? Which form predominates at physiological pH, and why? Through what pathway, and by what enzyme, is lactate produced?
  2. What is the normal resting range? Did the class's values fall in it? Did lactate rise after the 800 m? Explain in terms of production and clearance.
  3. Using Figure 2, when was the class mean highest? Why does blood lactate peak minutes after exercise? Was your hypothesis supported? Would active recovery have changed the 10- and 15-minute values?
  4. Based on Figure 3, is there a relationship between intensity and the lactate response? Give one physiological and one methodological reason for the scatter.
  5. Why do you get sore after intense exercise, and is lactate the cause? Use Figure 2 to support your answer. How can lactate threshold be improved? Describe two training strategies and the adaptations behind each.

Extra credit (up to +1): the limitations of building a recovery curve from different people at each time point; two sources of error in today's lab.

Grading rubric (15 pts)

CriterionPtsFull credit looks like
Participant data sheet & calculations3Complete; Δ lactate, speed, %HRmax, class means ± SD
Figures 1–35Correct chart types, error bars, trendline and r, labelled axes, numbered captions
Discussion6All five answered with data; correct metabolism; hypotheses evaluated
Presentation1Complete sentences, units on every value