Instructor Guide
Preparation, equipment for a 20-student section, campus set-up and equipment alternatives, and instructor resources.
Design principles
- Section size: 20 students → 4 teams of 5; five rotating roles per lab so everyone collects, measures and records.
- Time budget: pre-lab 15–30 min (≈ 15 min reading + ≈ 10 min quiz/short responses); in-lab 90 min with a minute-level timeline; report ≈ 90 min with time boxes per step.
- Equipment-limited labs (Weeks 9, 11, 12) use station rotations so a single rig or two units can serve the whole section.
- Quizzes are self-checking in the browser for formative feedback; answer options are shuffled each time the page loads. For graded quizzes, import the LMS quiz bank from the free instructor resources package. Short responses download as a .txt file for submission to your LMS.
- Reports are 50 points each with a rubric on each lab page; adjust to your syllabus. Each report has five required discussion questions; the remaining questions are optional extra credit (up to +3 pts).
Master equipment list (per section)
| Week | Equipment for 4 teams | Prep before class |
|---|---|---|
| 1 | 4 × 30 m tapes, painter's tape, 16 cones, 4 large protractors | Clear gym floor space; print problem set (optional) |
| 2 | 8 tripods (2/team), 4 meter sticks, pelvis marker tape | Confirm Kinovea installed on lab/loaner laptops |
| 3 | 4 tripods, 4 meter sticks, adhesive markers, 4 marked 8–10 m walkways | Tape walkways and capture zones |
| 4 | 4 × 30 m tapes, 20 cones, 8–12 stopwatches, 4 tripods | Reserve a flat lane area with ≥ 15 m run-out |
| 5 | 4 volleyballs, 4 × 10 m tapes, painter's tape, 20 cones | Mark 3.05 m wall tape at 4 wall stations |
| 6 | 4 tilt boards, 4 blocks + slotted masses, 4 scales (g), surface samples (wax paper, cardboard, felt, rubber, sandpaper, gym-floor sample) | Cut surface samples to board size |
| 7 | 8 tripods, 4 scales, floor tape, wall tape measures (optional) | Mark takeoff lines and 2 m approach marks |
| 8 | Scale, 8 stopwatches, 12 tennis balls, 2 × 50 m tapes, cones | Choose a staircase with a 4–7 m rise; measure the rise; reserve a field |
| 9 | Reaction board + platform scale + knife-edge; 2 tripods; lever kit (meter stick, fulcrum, hook masses, spring scale); 2.5 & 5 kg dumbbells, goniometer | Set up 4 stations with instruction cards; measure L and S₀ on the board |
| 10 | 8 smartphones (students'), scale | Check Phyphox axis orientation on an iPhone and an Android |
| 11 | BIOPAC MP36/35/45 units (2–4), SS2L leads, EL503 electrodes (6/subject), gel, abrasive pads/alcohol, headphones, 2 hand dynamometers | Launch BSL 4 and test L01 on each unit; post the BIOPAC L01 lesson PDFs in your LMS |
| 12 | Multi-camera motion capture set-up (or the provided 3D data sets), 1 tripod + phone | See Week 12 options below |
Weekly notes
| Week | Watch for |
|---|---|
| 1 | Calculators in RAD mode; Excel ATAN2 argument order (x, y). The Vector Walk usually produces 3–8% magnitude error — a good discussion of measurement error. |
| 2 | Kinovea time in ms; motion blur at takeoff breaks auto-tracking; mean flight acceleration ≈ −9.81 m/s² is a powerful quality check. |
| 3 | Included vs. flexion angle convention. Sample data in data/Week03_Sample_KneeAngle.csv for practice. |
| 4 | Human timing error (≈ 0.1–0.3 s) is large relative to 3 s sprints; video splits mitigate it. |
| 4 (demo) | Field Runner (field-runner.html): used in the Week 4 pre-lab, as an in-lab team model challenge (1:20–1:30), and in report Step 3 plus Discussion Question 5. The constant-acceleration model usually gives a slower 5 m split and a faster 15–20 m split than real sprinters, which is the point of Question 5. Write custom drills as scenario JSON (format on the demo page) and post them in your LMS. |
| 5 (demo) | Ski Jumper (ski-jump.html): adds a third pre-lab short response (best angle vs. takeoff height) and extends required Discussion Question 5 with an air-resistance comparison. The equivalent-fall-height comparison ("Try this" #4) is an optional bridge to Week 7. Quick check of the no-drag physics: 12 m/s at 30° from 3 m gives 1.60 s flight, 4.83 m peak and 16.67 m range. |
| 7 (demo) | Goal-Line Collision (collision.html, running back vs. linebacker): adds pre-lab Section 5 on collisions, a 5-minute exploration, Quiz Question 8, and an optional report question. Supports perfectly inelastic, partially elastic (any e) and elastic collisions, with a constant-force contact phase so students see the force–time pulse. Velocities are in m/s in real time, and scenarios in which the players never meet are flagged. |
| 5 | Throwers need practice to peak at the tape; the Height verifier should stand 4–5 m back, eye level with the tape if possible. |
| 6 | Slow, steady tilting; blocks that tip instead of slide must be discarded. |
| 7 | Slow-motion phones may record at 240 fps but play back at 30; students must use the capture fps for frame counts. |
| 8 | Stair climbs are short (≈ 5–10 s), so the VO₂ estimate is deliberately critiqued as non-steady-state. |
| 9 | Station B digitizing is time-consuming; students only need to start it in class. |
| 10 | Detrending before integration is essential or velocity drifts. Spot every eyes-closed trial. |
| 11 | Electrodes need ≥ 5 min on skin before calibration — place electrodes on the next teams' subjects during Block 1 if possible. |
| 12 | Processing time; see below. |
📍 Campus set-up
Each lab page has a 📍 Set up for your campus box. This table collects them so you can plan the term in one place.
| Week | Decide before the term |
|---|---|
| 2–3, 12 | Which laptops run Kinovea (Windows only); pair Mac users with a Windows teammate or reserve lab computers. |
| 3 | An 8–10 m walkway with a plain background and room for a camera 3–4 m to the side. |
| 4 | A flat lane with 20 m plus at least 15 m of run-out (gym, track or turf). Use the same surface for every team. |
| 5 | A wall at least 3.05 m high with 6–8 m of clear floor in front of it. |
| 8 | Any staircase with a 4–7 m vertical rise that can be cleared of other users. Measure the rise once (risers × riser height) and give it to students; the lab's 20 ft (6.10 m) is an example. |
| 9 | A reaction board (a rigid board, a knife-edge or dowel, and a platform scale) or the paper-only segmental method if no board is available. |
| 10 | Students' phones with Phyphox; check the axis labels on one iPhone and one Android. |
| 11 | EMG system: BIOPAC (Lesson L01) as written, or see the alternatives below. |
| 12 | Motion capture: see Week 12 options below. |
Equipment alternatives
- No EMG system (Week 11): run Station C (grip dynamometer) as written, use the Recruitment & EMG Envelope tool for the recruitment concepts, and analyze
data/Week11_Backup_EMG.csvfor the tables and figures. Other teaching EMG systems (for example Vernier or ADInstruments) follow the same rest–clench–release protocol; post your system's procedure in your LMS. - No force plate: no lab requires one. Week 7 estimates impulse and GRF from flight time and contact time measured on slow-motion video.
- No timing gates (Week 4): stopwatches plus slow-motion phone video for splits, as written.
Week 12 options: 3D motion capture
Week 12 was written for a six-camera markerless system (MoCap6, built on the open-source Pose2Sim and OpenSim). Choose the option that matches your equipment; the learning outcomes (3D vs. 2D, data quality, method comparison) are the same in each.
- A · Any multi-camera system (marker-based or markerless, for example a Pose2Sim set-up with 2–4 synchronized cameras): run Stations A–D as written and substitute your system's quality metrics for the MoCap6 checks.
- B · No 3D system: students film and digitize the 2D Kinovea trial as written, then use the provided 3D data sets (
data/Week12_Backup_MoCap6_Walk.csvand_Squats.csv) for the 3D side of the comparison and the quality audit (Week12_Backup_QualityAudit.csv).
If you use MoCap6
- Connect the cameras at least 1 minute before class so clock synchronization (IEEE 1588 PTP) settles before recording.
- Calibrate before class: lens intrinsics with the ChArUco board covering the frame corners (target RMS < 0.5 px), then camera positions by walking the board through the volume (target < 1 px), finishing with the board flat on the floor as the floor reference.
- Run the flash test on the first trial of the session.
- Process a demonstration trial in advance for Station C. A 6 Hz filter suits squats and walking; raise it to 10–15 Hz for jumps. Processing on a CPU can take hours, on a GPU minutes, so process student trials after class and post the CSV exports.
- Tell students that markerless capture gives kinematics only; the muscle overlay shows length change, not activation.
Instructor resources
Answer keys (including the Week 1 problem set), the pre-lab quiz bank for Canvas, Blackboard, D2L and Moodle, and grading notes are provided free to verified instructors. They are kept off the public site so that students cannot find them.
Request instructor resources →
Students see the correct answer and explanation on each lab page after they check their quiz, so the on-page quizzes work as study tools. Use the LMS quiz bank for graded versions.
Design notes
- Backup data (all weeks): every lab report links a simulated data set in
data/with the same columns as that week's data sheet, for absences and failed trials. Students say in their report if they used it. - Workload: five required discussion questions per report; the rest are optional extra credit (up to +3 pts).
- Time savers: Week 2 tracking may be finished after lab (report Step 0). Week 7 uses one trial per condition and each student extracts only their own six jumps; the discussion can be written or a 2-minute video. In Week 9 Station B is photos only, the second-class lever is optional, and only the standing posture is required for segmental COM. In Week 12 one participant per team is captured and 2D tracking covers one stride.
- Week 2 model figure and model answer (built from the backup data) show students the expected standard early in the term.
- Week 4: students compute both estimates of velocity at 20 m (v̄₁ and 2·v̄₁) and test them against video splits at 5 m intervals.
- Week 7: average power is calculated as F̄·v̄; the CMJ propulsive interval is the lowest point → toe-off.
- Week 10: with the phone upright against the sternum, Phyphox's y-axis is vertical and z is anterior–posterior, so the manual uses x = ML, z = AP, y = vertical and asks students to verify by leaning. Detrend before integrating.
- Week 11: the BIOPAC lesson procedure is summarized and referenced, not reproduced; it is BIOPAC's copyrighted document, so post the lesson PDFs that come with your BIOPAC software in your LMS.
- Syllabus: the schedule, outcomes and grading weights on the Course Guide are suggestions; replace them with your official syllabus.
Editing this OER
- Each week is a single HTML file (
week01.html…week12.html); edit in any text editor or VS Code. - Navigation is generated from the list at the top of
assets/oer.js— change titles there. - Quiz questions: each
<div class="q" data-answer="b">holds one question; thevalueof the correct option must matchdata-answer. - Data-sheet buttons: edit the
data-colsattribute (columns separated by|). - Interactive tools are attached with
data-widget="name"; the stand-alone simulations arefield-runner.html,ski-jump.htmlandcollision.html;demos.htmllists everything, anddemo.html?w=nameopens any single widget on its own page. Available widgets: vector, derivative (data-signal="cmj" or "knee"), sprint, projectile, incline, jump, stairs, torque, sway, emg. - Adopting at another institution: edit the
SITEblock at the top ofassets/oer.js(course name, author, institution) and, if you like, replace the M³ logo files inassets/img(m3-mark.svg,m3-mark-simple.svg,m3-logo-stacked.svg,favicon.png). - To host: upload the whole folder to your LMS file area, GitHub Pages, or any web server; open
index.html. It also works offline from a local folder.